• Contents
  • Index
  • Search
  • Welcome to Fatigue+
  • 1. About the Fatigue+ Documentation
    • 1.1 Using Help
    • 1.2 Documentation Conventions
    • 1.3 Using Tutorials
  • 2. Getting Started & Tutorial
    • 2.1 Getting Started
      • 2.1.1. Introduction
      • 2.1.2. System Requirements
      • 2.1.3. Software Installation
      • 2.1.4. Starting FatiguePlus
    • 2.2 Tutorials
      • 2.2.1 Tutorial 1 - Basquin Model with ASTM1049 Rainflow Counting
        • 2.2.1.1 Creating a New Project
        • 2.2.1.2 Project Setup
        • 2.2.1.3 Specifying Fatigue Modeling Data
        • 2.2.1.4 Running the Program
        • 2.2.1.5 Viewing Results
      • 2.2.2 Tutorial 2 - Basquin-Coffin-Manson Model with Component Stresses and Strains
        • 2.2.2.1 Creating a New Project
        • 2.2.2.2 Project Setup
        • 2.2.2.3 Specifying Fatigue Modeling Data
        • 2.2.2.4 Running the Program
        • 2.2.2.5 Viewing Results
      • 2.2.3 Tutorial 3 - Kandil-Brown-Miller Model with Component Stresses and Strains
        • 2.2.3.1 Creating a New Project
        • 2.2.3.2 Project Setup
        • 2.2.3.3 Specifying Design Code Data
        • 2.2.3.4 Running the Program
        • 2.2.3.5 Viewing Results
      • 2.2.4 Tutorial 4 - Fatemi-Socie Model with Shear Strains and Normal Stresses
        • 2.2.4.1 Creating a New Project
        • 2.2.4.2 Project Setup
        • 2.2.4.3 Specifying Design Code Data
        • 2.2.4.4 Running the Program
        • 2.2.4.5 Viewing Results
      • 2.2.5 Tutorial 5 - EN 12952-3 Thermal Fatigue with ANSYS Result (.rst) File
        • 2.2.5.1 Creating a New Project
        • 2.2.5.2 Project Setup
        • 2.2.5.3 Specifying Design Code Data
        • 2.2.5.4 Running the Program
        • 2.2.5.5 Viewing Results
      • 2.2.6 Tutorial 6 - EN 13445-3 Presssure Vessel Unwelded Shell
        • 2.2.6.1 Creating a New Project
        • 2.2.6.2 Project Setup
        • 2.2.6.3 Specifying Design Code Data
        • 2.2.6.4 Running the Program
        • 2.2.6.5 Viewing Results
      • 2.2.7 Tutorial 7 - EN 13445-3 Presssure Vessel Welded Shell
        • 2.2.7.1 Creating a New Project
        • 2.2.7.2 Project Setup
        • 2.2.7.3 Specifying Design Code Data
        • 2.2.7.4 Running the Program
        • 2.2.7.5 Viewing Results
      • 2.2.8 Tutorial 8 - ASME Sec VIII Div 2 Presssure Vessel Unwelded Shell
        • 2.2.8.1 Creating a New Project
        • 2.2.8.2 Project Setup
        • 2.2.8.3 Specifying Design Code Data
        • 2.2.8.4 Running the Program
        • 2.2.8.5 Viewing Results
      • 2.2.9 Tutorial 9 - ASME Sec VIII Div 2 Presssure Vessel Welded Shell
        • 2.2.9.1 Creating a New Project
        • 2.2.9.2 Project Setup
        • 2.2.9.3 Specifying Design Code Data
        • 2.2.9.4 Running the Program
        • 2.2.9.5 Viewing Results
      • 2.2.10 Tutorial 10 - ASME Sec VIII Div 3 Presssure Vessel Unwelded Shell
        • 2.2.10.1 Creating a New Project
        • 2.2.10.2 Project Setup
        • 2.2.10.3 Specifying Design Code Data
        • 2.2.10.4 Running the Program
        • 2.2.10.5 Viewing Results
      • 2.2.11 Tutorial 11 - ASME Sec III Div Appendices Presssure Vessel Unwelded Shell
        • 2.2.11.1 Creating a New Project
        • 2.2.11.2 Project Setup
        • 2.2.11.3 Specifying Design Code Data
        • 2.2.11.4 Running the Program
        • 2.2.11.5 Viewing Results
  • 3. Graphical User Interface (GUI)
    • 3.1 User Interface
    • 3.2 Toolbars
    • 3.3 Menu Bar
    • 3.4 Chart Control Panel
    • 3.5 Information Windows
    • 3.6 Chart Toolbar
  • 4. Input Data Editor
    • 4.1 User Interface
    • 4.2 Stress Unit
    • 4.3 Stress Method
    • 4.4 Item Tabs
    • 4.5 Toolbar
    • 4.6 Data Entry
    • 4.7 Generating Spectrum
    • 4.8 Data Counter
  • 5. Work Flow
    • 5.1 Data Entry and Project Setup
    • 5.2 General Purpose Fatigue Model Input
    • 5.3 EN 12952-3
    • 5.4 EN 13445-3
    • 5.5 ASME Sec VIII Div 2
    • 5.6 ASME Sec VIII Div 3
    • 5.7 ASME Sec III Appendices
    • 5.8 Running Fatigue Life Calculations
    • 5.9 Viewing Results
  • .rst file
  • ANSYS
  • ASME Material
  • ASME Sec. II Part D
  • ASME Section III
  • ASME Section VIII
  • ASTM E1049
  • Autofrettage
  • Basquin
  • Basquin-Coffin-Manson
  • binlib.dll
  • Boiler
  • Burr grinding
  • Chart control panel
  • Chart toolbar
  • Charts
  • Constant amplitude
  • Constant temperature
  • Correction factor
  • Critical plane
  • cumulative damage
  • cumulative damage ratio
  • Curves
  • Cyclic
  • Cyclic loading
  • Damage ratio
  • Damage ratio chart
  • Data entry
  • Design
  • Design code
  • Detailed report
  • Elevated temperature
  • EN 12952-3
  • EN 13445-3
  • EN material
  • F1
  • Fatemi-Socie
  • Fatigue curve
  • Fatigue Strength Reduction Factor
  • Goodman
  • Group box
  • Hammer peening
  • Help
  • Histogram
  • Home
  • Hypertext
  • Index
  • Input data editor
  • Item tabs
  • Kandil-Brwon-Miller
  • Legend
  • Loading
  • Loading type
  • Manual input
  • Manually input
  • Matake
  • Mathematical Notation
  • Menu bar
  • Morrow
  • Multiaxial
  • New
  • Nonproportional
  • Nuclear
  • Output information
  • Plot fatigue curve
  • Pressure Vessel
  • Principal stress
  • Project setup
  • Proportional
  • Report
  • Report type
  • Result
  • Result file
  • Roughness factor
  • Run
  • Search
  • Shear stress
  • Smooth bar fatigue curve
  • Sn : Sp Ratio
  • S-N curve
  • Specification
  • Stress
  • Stress & temperature time history chart
  • Stress method
  • Stress range
  • Stress range histogram
  • Stress range histogram chart
  • Stress type
  • Stress unit
  • Structural
  • Style
  • Summary
  • Tabs
  • Temperature
  • Temperature history
  • Terminology
  • TIG dressing
  • Time history
  • Time history chart
  • Toolbar
  • Tutorial
  • Unit
  • User interface
  • Variable amplitude
  • Vessel Class
  • Viewing results
  • von Mises
  • von Mises stress
  • Water-tube
  • Weld detail
  • Welded joint fatigue curve
  • Work flow
  • Yield
  • Yield stress
Match: